Hitohira - Imojiya - TH Damascus - 180mm Petty - Red Pakka Handle
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Hitohira - Togashi - Blue #2 - Kurouchi - 165mm Petty - Cherry & Ebony Handle
Brand: Hitohira ひとひら (一片)
Made in: Sakai, Osaka - Japan
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi 憲哉
Line: Bue #2 Kurouchi
Profile: Petty
Edge Length: 155mm
Blade Height: 29.7mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Construction: Awase, San-Mai
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Cherry
Ferrule/Bolster Material: Ebony
Total Length: 292mm
Spine Length: 168mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 125mm
Weight: 81g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Hitohira - Togashi - Stainless Clad Blue #1 - Mirror Polished - 165mm Petty - Ziricote Handle
Brand: Hitohira ひとひら
Made in: Sakai-Osaka/ Japan
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi 憲哉
Line: Togashi Stainless Clad
Profile: Petty
Edge Length: 154mm
Blade Height: 34mm
Edge Steel: Yasuki Blue (Aogami) #1
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Mirror Polished
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ziricote
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 167mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 122mm
Total Length: 288mm
Weight: 88g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.