Paring

HADO - Ginsan Urushi Kijiro - 90mm Paring - Urushi Handle

$295.00

Brand: HADO
Smith: Shogou Yamatsuka
Sharpener: Tadataka Maruyama
Profile: Paring
Edge Steel: Ginsanko (Silver #3)
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Mono Urushi Wa
Total Length: 195mm
Edge Length: 87mm
Spine Length: 95mm
Blade Height: 26mm
Thickness at Spine: 1.9mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 100mm
Weight: 40g
Saya/Guard: N/A

HADO - Ginsan Urushi Kijiro - 90mm Paring - Urushi Handle

Ryusen - TANGANRYU - VG10 - 105mm Paring - Maple Hybrid Handle

$335.00

Brand: Ryusen 株式会社龍泉刃物
Line: TANGAN RYU
Profile: Petty
Edge Steel: VG10
Steel Type: Stainless
Cladding: Soft Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Maple Hybrid Western
Total Length: 221mm
Edge Length: 103mm
Spine Length: 115mm
Blade Height: 25mm
Thickness at Spine: 2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 105mm
Weight: 62g
Saya: N/A

Ryusen - TANGANRYU - VG10 - 105mm Paring - Maple Hybrid Handle

Ryusen - TANGANRYU - VG10 - Tsuchime Damascus - 105mm Paring - Micarta Hybrid Handle

$240.00

Brand: Ryusen 株式会社龍泉刃物
Line: TANGAN RYU
Profile: Petty
Edge Steel: VG10
Steel Type: Stainless
Cladding: Soft Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Micarta Hybrid
Total Length: 216mm
Edge Length: 99mm
Spine Length: 110mm
Blade Height: 20mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 104mm
Weight: 68g
Saya: N/A

Ryusen - TANGANRYU - VG10 - Tsuchime Damascus - 105mm Paring - Micarta Hybrid Handle

STEELPORT Knife Co. - 52100 Differentially Hardened - 4" Paring Knife - Integral Bolster Maple Burl Handle

$250.00

Brand: STEELPORT Knife Co.
Made In: Portland, Oregon - USA
Profile: Chef Knife
Edge Length: 105mm
Blade Height: 30mm
Edge Steel:52100
HRC: 65
Steel Type: Carbon
Cladding: N/A
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oregon Large Leaf Maple Burl w/ Integral Bolster
Total Length: 220mm
Spine Length: 115mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 105mm
Weight: 105g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.