Japan

Hitohira - Imojiya Kuma - Blue #2 Nashiji Tsuchime - 165mm Nakiri - Western Handle

DAA-180-DA

$120.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya Kuma
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Nakiri
Edge Length: 165mm
Edge Steel: Blue #2 (Aogami)
Steel Type: Stainless Clad Carbon Core
Cladding: Soft Iron Tsuchime
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 296mm
Spine Length: 173mm
Blade Height: 49mm
Thickness: 1.7mm
Handle Length: 120mm
Weight: 170g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care Advisements: This blade has a carbon core steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Imojiya Kuma - Blue #2 Nashiji Tsuchime - 165mm Nakiri - Western Handle

Hitohira - Imojiya Kuma - Blue #2 Nashiji Tsuchime - 180mm Santoku - Western Handle

DAA-180-CA

$120.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya - Blue (Aogami) #2
Producing Area: Seki, Gifu Prefecture
Profile: Santoku
Edge Length: 180mm
Edge Steel: Blue (Aogami) #2
Steel Type: Stainless Clad Carbon Core
Cladding: Stainless Nashiji Tsuchime
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western pakka
Total Length: 328mm
Spine Length: 185mm
Handle Length: 120mm
Blade Height: 45mm
Thickness: 1.9mm
Weight: 162mm

CARE ADVISEMENTS

This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya Kuma - Blue #2 Nashiji Tsuchime - 180mm Santoku - Western Handle

Hitohira - Imojiya Kuma - Blue #2 Nashiji Tsuchime - 200mm Gyuto - Western Handle

DAA-180-FA200

$130.00

Brand: Hitohira ひとひら (一片)
Producing Area: Seki/Gifu - Japan
Profile: Gyuto
Edge Length: 203mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Stainless Clad Carbon Core
Cladding: Soft Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 323mm
Spine Length: 207mm
Blade Height: 47mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 121mm
Weight: 167g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya Kuma - Blue #2 Nashiji Tsuchime - 200mm Gyuto - Western Handle

Hitohira - Imojiya MZ - Blue #2 Stainless Clad - 145mm Santoku - Black Western Handle

AAA-269B2-01-CA145

$80.00

Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu, Japan
Line: Imojiya MZ
Profile: Santoku
Edge Length: 145mm
Blade Height: 39mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel
Construction: Awase/Clad
Cladding: Soft Stainless Clad
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material:
Total Length: 253mm
Spine Length: 150mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 105mm
Weight: 105g
Saya/Guard: Purchase Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya MZ - Blue #2 Stainless Clad - 145mm Santoku - Black Western Handle

Hitohira - Imojiya ST - Damascus - 180mm Santoku - Western Handle

daa-183-ca

$175.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya
Producing Area: Seki, Gifu Prefecture
Profile: Santoku
Edge Length: 180mm
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrious
Handle: Imitation Mahogany
Total Length: 298mm
Spine Length: 190mm
Handle Length: 110mm
Blade Height: 47mm
Thickness of Spine at Handle: 2mm
Thickness of Spine Half Way: 2mm
Thickness of Spine ~1cm from Tip: 1mm
Weight: 193mm
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - Damascus - 180mm Santoku - Western Handle

Hitohira - Imojiya ST - Damascus - 240mm Gyuto - Western Handle

daa-183-fa240

$220.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya ST
Producing Area: Seki-Gifu/ Japan
Profile: Gyuto
Edge Length: 240mm
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western Imitation Mahogany
Total Length: 360mm
Spine Length: 247mm
Blade Height: 50mm
Thickness: 1.9mm
Handle Length: 115mm
Weight: 227g
Saya/Guard: No

Hitohira - Imojiya ST - Damascus - 240mm Gyuto - Western Handle

Hitohira - Imojiya ST - Tsuchime Damascus - 135mm Petty - Western Handle

AAA-211-01-BA135

$90.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya VG-10
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Utility
Edge Length: 137mm
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 247mm
Spine Length: 138mm
Blade Height: 29mm
Thickness of Spine at Handle: 1.8mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.3mm
Handle Length: Pakka Western
Weight: 86g
Saya/Guard: Purchase Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - Tsuchime Damascus - 135mm Petty - Western Handle

Hitohira - Imojiya ST - Tsuchime Damascus - 165mm Nakiri - Western Pakka Handle

AAA-211-01-LB

$135.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya ST
Profile: Nakiri
Edge Length: 165mm
Hardness: 59±1HRC
Steel Type: Stainless
Steel: VG-10
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 295mm
Spine Length: 172mm
Handle Length: 122mm
Blade Height: 46mm
Thickness at Spine: 1.6mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 1.4mm
Weight: 187g
Saya/Guard: Purchased Separately

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - Tsuchime Damascus - 165mm Nakiri - Western Pakka Handle

Hitohira - Imojiya ST - Tsuchime Damascus - 170mm Santoku - Western Handle

AAA-211-01-CA

$140.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya ST
Profile: Santoku
Edge Length: 170mm
Hardness: 59±1HRC
Steel Type: Stainless
Steel: VG-10
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 296mm
Spine Length: 173mm
Handle Length: 123mm
Blade Height: 47mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.4mm
Weight: 176g
Saya/Guard: Purchased Separately

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - Tsuchime Damascus - 170mm Santoku - Western Handle

Hitohira - Imojiya ST - Tsuchime Damascus - 180mm Nakiri - Wa Handle

daa-181-da

$140.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya ST
Profile: Nakiri
Edge Length: 180mm
Hardness: 59 HRC
Steel Type: Stainless
Cladding: Stainless
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 313mm
Spine Length: 190mm
Handle Length: 121mm
Blade Height: 45mm
Thickness: 2.5mm
Weight: 185g
Saya/Guard: No

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - Tsuchime Damascus - 180mm Nakiri - Wa Handle

Hitohira - Imojiya ST - Tsuchime Damascus - 180mm Santoku - Pakka Handle

daa-181-ca180

$140.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya ST
Profile: Santoku
Steel: VG-10
Steel Type: Stainless
Cladding: Soft Stainless
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 310mm
Edge Length: 180mm
Spine Length: 190mm
Handle Length: 122mm
Blade Height: 49mm
Thickness: 2.2mm
Weight: 164g
Saya/Guard: N/A

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - Tsuchime Damascus - 180mm Santoku - Pakka Handle

Hitohira - Imojiya ST - Tsuchime Damascus - 210mm Gyuto - Pakka Handle

daa-181-fa210

$150.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya VG-10
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Gyuto
Edge Length: 210mm
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka & Pakka Ferrule Octagonal
Total Length: 342mm
Spine Length: 220mm
Blade Height: 46mm
Thickness: 2.4mm
Handle Length: 122mm
Weight: 175g
Saya/Guard: No

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - Tsuchime Damascus - 210mm Gyuto - Pakka Handle

Hitohira - Imojiya ST - Tsuchime Damascus - 240mm Gyuto - Western Handle

AAA-211-01-FA240

$180.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya VG-10
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Gyuto
Edge Length: 240mm
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 375mm
Spine Length: 245mm
Blade Height: 51mm
Thickness of Spine at Handle: 1.6mm
Thickness of Spine Half Way: 1.4mm
Thickness of Spine ~1cm from Tip: 0.9mm
Handle Length: 128mm
Weight: 232g
Saya/Guard: Purchased Separately.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - Tsuchime Damascus - 240mm Gyuto - Western Handle

Hitohira - Imojiya ST - Tsuchime Damascus - 75mm Paring - Pakka Handle

DAA-181-AA

$80.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya - Tsuchime Damascus
Smith: Seto 瀬戸
Producing Area: Seki, Gifu Prefecture
Profile: Paring
Edge Length: 75mm
Edge Steel: VG-10
Hardness: 60-61 HRC
Steel Type: Stainless
Cladding: Stainless Tsuchime Damscus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Octagonal pakka, pakka ferrule
Total Length: 198mm
Spine Length: 94mm
Handle Length: 114mm
Blade Height: 21mm
Thickness: 1.9mm
Weight: 67g
Saya/Guard: No

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - Tsuchime Damascus - 75mm Paring - Pakka Handle

Hitohira - Imojiya TH - Carbon - Honesuki Kaku - Pakka Handle

AAA-265S-2-01-HA

$75.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH
Producing Area: Seki-Gifu/ Japan
Profile: Honesuki Maru
Steel Type: Carbon
Bevel: Double
Bevel Symmetry: 90:10
Hand Orientation: Right-Handed, Asymmetric
Handle: Pakka Western
Total Length: 256mm
Edge Length: 137mm
Spine Length: 140mm
Handle Length: 113mm
Blade Height: 37mm
Thickness at Handle: 2.0mm
Thickness at Middle: 2.0mm
Thickness at Tip: 1.5mm
Weight: 143g
Saya/Guard: Purchased Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Carbon - Honesuki Kaku - Pakka Handle

Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle

AAA-265S-2-01-HB

$75.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH
Producing Area: Seki-Gifu/ Japan
Profile: Honesuki Maru
Steel Type: Carbon
Bevel: Double
Bevel Symmetry: 90:10
Hand Orientation: Right-Handed, Asymmetric
Handle: Pakka Western
Total Length: 255mm
Edge Length: 148mm
Spine Length: 154mm
Handle Length: 103mm
Blade Height: 30mm
Thickness at Handle: 2.1mm
Thickness at Middle: 1.8mm
Thickness at Tip: 1.5mm
Weight: 157g
Saya/Guard: Purchased Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle

Hitohira - Imojiya TH - Damascus - 150mm Petty - Linen Micarta Western Handle

AAA-265-10-BA150

$130.00

Brand: Hitohira ひとひら (一片)
Made In: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Petty
Edge Length: 143mm
Blade Height: 30mm
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Damascus Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Linen Micarta Western
Total Length: 257mm
Spine Length: 150mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 105mm
Weight: 86g

Saya/Guard: Purchase Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Damascus - 150mm Petty - Linen Micarta Western Handle

Hitohira - Imojiya TH - Damascus - 150mm Petty - Red Pakka Handle

AAA-265R-01-BA150

$150.00

Brand: Hitohira ひとひら (一片)
Made In: Echizen, Japan
Line: Imojiya TH
Profile: Petty
Edge Length: 141mm
Blade Height: 30mm
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Damascus Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Red Pakka Wa
Total Length: 274mm
Spine Length: 158mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 115mm
Weight: 83g
Saya/Guard: Purchased Separately

Hitohira - Imojiya TH - Damascus - 150mm Petty - Red Pakka Handle

Hitohira - Imojiya TH - Damascus - 180mm Santoku - Red Pakka Handle

AAA-265R-01-CA180

$190.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH Damascus
Profile: Santoku
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Handle: Red Pakka Wa
Hand Orientation: Ambidextrious
Total Length: 330mm
Edge Length: 175mm
Spine Length: 193mm
Blade Height: 52mm
Handle Length: 140mm
Thickness of Spine at Handle: 1.9mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.1mm
Weight: 155g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Damascus - 180mm Santoku - Red Pakka Handle

Hitohira - Imojiya TH - Damascus - 210mm Gyuto - Red Pakka Handle

AAA-265R-01-FA210

$215.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH Damascus
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Soft Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Handle: Red Pakka Wa
Hand Orientation: Ambidextrious
Total Length: 364mm
Edge Length: 206mm
Spine Length: 223mm
Blade Height: 46mm
Handle Length: 140mm
Thickness of Spine at Handle: 2.1mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 0.6mm
Weight: 160g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Damascus - 210mm Gyuto - Red Pakka Handle

Hitohira - Imojiya TH - Damascus - 240mm Gyuto - Red Pakka Handle

AAA-265R-01-FA240

$235.00

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH Damascus
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Soft Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Handle: Pakka Wa
Hand Orientation: Ambidextrious
Total Length: 389mm
Edge Length: 232mm
Spine Length: 250mm
Blade Height: 50mm
Handle Length: 140mm
Thickness of Spine at Handle: 2mm
Thickness of Spine Half Way: 1.8mm
Thickness of Spine ~1cm from Tip: 0.9mm
Weight: 183g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.