New!

Brand: Hitohira ひとひら 
Made in: Seki, Gifu - Japan 
Line: HG
Profile: Santoku
Edge Length: 185mm
Blade Height: 45mm
Edge Steel: Unclassified Stainless
Steel Type: Stainless Steel
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Tsuchime Damascus 
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous  
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 196mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 135mm
Total Length: 330mm
Weight: 136g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片)
Producing Area: Sakai-Osaka/ Japan
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi
Line: Togashi Honyaki
Profile: Yanagiba
Edge Length: 288mm
Blade Height: 35mm
Edge Steel: White #1 
Steel Type: Carbon
Construction: Mizu Honyaki
Cladding: N/A
Finish: Sanbonsugi
Bevel: Single
Bevel Symmetry:  0/100 
Hand Orientation: Right Handed
Handle Shape: Octagonal 
Handle Material: Kurokaki Persimmon
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 305mm
Thickness of Spine at Handle: 4.2mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 145mm
Total Length: 450mm
Weight: 239g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Echizen 
Profile: Yanagiba
Edge Length: 203mm
Blade Height: 31mm
Edge Steel: Blue #2
Steel Type: Carbon
Construction: Awase/Clad, Ni Mai
Cladding: Soft Iron
Finish: Damascus
Bevel: Single
Bevel Symmetry:  0/100 
Hand Orientation: Right Handed
Handle Shape: D-Shaped
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Spine Length: 213mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 130mm
Total Length: 342mm
Weight: 120g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand:  Hitohira ひとひら
Made in: Seki-Gifu/ Japan
Line: KH
Profile: Petty
Edge Length: 150mm
Blade Height: 30mm
Edge Steel: Unclassified Stainless Steel  
Steel Type: Stainless Steel  
Construction: Mono-Steel
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 283mm
Spine Length: 162mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 121mm
Weight: 55g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Echizen
Profile: Gyuto 
Edge Length: 212mm
Blade Height: 50.2mm
Edge Steel: SG2
Steel Type: Stainless Steel
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Keyaki Zelkova
Ferrule/Bolster Material: Pakka
Spine Length: 228mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 140mm
Total Length: 370mm
Weight: 156g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら
Line: Echizen
Profile: Santoku 
Edge Length: 183mm
Blade Height: 51mm
Edge Steel: SG2
Steel Type: Stainless Steel
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Keyaki Zelkova
Ferrule/Bolster Material: Pakka
Spine Length: 201mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 127mm
Total Length: 327mm
Weight: 156g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら
Made in: Tosa-Kochi/ Japan
Line: Tosa
Profile: Santoku 
Edge Length: 170mm
Blade Height: 47mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel 
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Rengas Wood
Spine Length: 189mm
Thickness of Spine at Handle: 4.7mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 127mm
Total Length: 316mm
Weight: 118g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand:  Hitohira ひとひら 
Made in: Sakai-Osaka/ Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener:  Kenya Togashi 憲哉 
Line: Togashi Stainless Clad
Profile: Petty
Edge Length: 154mm
Blade Height: 34mm
Edge Steel: Yasuki Blue (Aogami) #1
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Mirror Polished
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Ziricote
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 167mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 122mm
Total Length: 288mm
Weight: 88g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Gorobei 五郎兵衛
Sharpener: Kyūzō 久蔵
Line: Gorobei x Kyuzo
Profile: Santoku
Edge Length: 169mm
Blade Height: 45.5mm
Edge Steel: Shirogami #2/White #2
Steel Type: Carbon
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Damascus
Bevel: Wide Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 315mm
Spine Length: 184mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 133mm
Weight: 133g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Imojiya TH Silver #3
Profile: Santoku/Home Chef
Edge Length: 184mm
Blade Height: 47.5mm
Edge Steel: Silver #3/Ginsanko
Steel Type: Stainless
Construction: Awase, San-Mai
Cladding: Soft Stainless
Finish: Nashiji (textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Makassar Ebony
Ferrule/Bolster Material: N/A
Total Length: 320mm
Spine Length:192mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 133mm
Weight: 194g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Imojiya TH Silver #3
Profile: Gyuto/Chef
Edge Length: 215mm
Blade Height: 46mm
Edge Steel: Silver #3/Ginsanko
Steel Type: Stainless
Construction: Awase, San-Mai
Cladding: Soft Stainless
Finish: Nashiji (textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Makassar Ebony
Ferrule/Bolster Material: N/A
Total Length: 357mm
Spine Length: 224mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 133mm
Weight: 204g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: Futana Stainless
Profile: Sujihiki/Slicer
Edge Length: 274mm
Blade Height: 37mm
Edge Steel: AUS-10
Steel Type: Stainless
Construction: Awase, San-Mai
Cladding: Soft Stainless 
Finish: Tsuchime, Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Cherry
Ferrule/Bolster Material: Ebony
Total Length: 437mm
Spine Length: 294mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 145mm
Weight: 149g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Gorobei 五郎兵衛
Sharpener: Kyūzō 久蔵
Line: Gorobei x Kyuzo
Profile: Gyuto/Chef
Edge Length: 198mm
Blade Height: 50.5mm
Edge Steel: Shirogami #2/White #2  
Steel Type: Carbon
Construction: Awase, San-Mai
Cladding: Soft Iron
Finish: Damascus 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Magnolia
Ferrule/Bolster Material: Buffalo Horn
Total Length: 356mm
Spine Length: 215mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 144mm
Weight: 182g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: TH Silver #3
Profile: Petty/Utility
Edge Length: 120mm
Blade Height: 27.9mm
Edge Steel: Silver #3/Ginsanko
Steel Type: Stainless
Construction: Awase, San-Mai
Cladding: Soft Stainless
Finish: Nashiji (textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Double
Handle Shape: Oval Octagonal
Handle Material: Makassar Ebony
Ferrule/Bolster Material: N/A
Total Length: 245mm
Spine Length: 130mm
Thickness of Spine at Handle: 2.4mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 115mm
Weight: 84g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements

Brand: Sakai Kikumori 堺菊守
Made In: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Line: Aogami Super
Profile: Takobiki
Edge Length: 280mm
Blade Height: 33.7mm
Edge Steel: Super Blue (Aogami Super)
Steel Type: Carbon
Grind: Single Bevel
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Iron
Finish: Kasumi
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: N/A
Handle Material: N/A
Ferrule/Bolster Material: N/A
Total Length: 410mm
Spine Length: 390mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 2.3mm
Handle Length: N/A - tang is signed
Weight: 142g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.